Licensed · Insured · 5 Google Rating
The majority of cabinet paint failures in Bentonville homes trace back to the same root cause: builder-grade MDF and flat-pack construction painted with wall-spec latex that was never designed for door surfaces. Builders use it because it applies fast and looks acceptable at move-in. Within 2 to 3 years, the finish chips at the drawer pulls, yellows near the stove, and peels at the door edges where hands make contact daily. What looks like a paint failure is really a failure of the wrong product applied with the wrong process to the wrong substrate.
The correct cabinet painting process starts with door and drawer removal so every surface gets full coverage — not the coat-around-the-hardware shortcut that leaves visible brush strokes and thin edges. After removal: degloss, sand, and a bonding primer formulated specifically for MDF and laminate. The topcoat is Sherwin-Williams Emerald Urethane Trim Enamel, sprayed on for a factory-smooth finish that resists chipping, yellowing, and cleaning chemicals. The result looks like new cabinetry at a fraction of replacement cost. Brush Brothers has executed this process on hundreds of Bentonville kitchens, and every project is backed by the 🛡️ 1-Year “No Fuss” Guarantee.
All doors and drawer fronts removed, numbered, and sprayed in a controlled environment for drip-free coverage.
All surfaces deglossed and sanded to create proper adhesion profile. No paint-over-existing-finish shortcuts.
Surface-specific bonding primer applied to all MDF and laminate surfaces before any topcoat.
Cabinet boxes painted in place — interior visible surfaces, all exterior faces, and rollout shelf edges.
Sherwin-Williams Emerald Urethane Trim Enamel sprayed for a hard, smooth, factory-quality topcoat.
All doors and drawer fronts reinstalled and hardware re-hung. Hinges adjusted for proper alignment.
Our team inspects your existing cabinets, identifies substrate type, discusses color options, and provides a written quote. Current finish condition and substrate material both affect the prep scope and price.
Doors removed, surfaces deglossed and sanded, bonding primer applied. This is the stage that determines whether the finish lasts 2 years or 10. No shortcuts on substrate prep.
Two finish coats of Sherwin-Williams Emerald Urethane Trim Enamel applied by spray for a smooth, level finish with no brush marks. Full cure time between coats.
All doors and drawer fronts reinstalled. Hardware re-hung. Hinges adjusted. Final walkthrough to confirm alignment, coverage, and finish quality before sign-off.
The topcoat matters. Sherwin-Williams Emerald Urethane Trim Enamel is one of the hardest-curing cabinet finishes available — it resists chipping at hardware contact points, withstands cleaning chemicals, and holds its color without yellowing over time. It’s the same product used on millwork and furniture in professional environments. When applied over a proper bonding primer and cured fully between coats, it produces a result indistinguishable from factory cabinet finishing.
For most Bentonville kitchens with MDF construction, the full process is: degloss, 120-grit sand, bonding primer (shellac-based or high-adhesion waterborne depending on substrate), two finish coats of Emerald Urethane, light sand between coats. On all-wood cabinets in good condition, the primer system is simplified, but the topcoat and spray process are identical.
Schedule Your Free Estimate
Cabinet painting cost depends on the number of doors and drawer fronts, substrate condition, and current finish state. The ranges below reflect typical full-kitchen projects in Bentonville. Your free written estimate covers exact scope and price.
New hardware installation quoted separately. Pricing reflects painting only — not replacement of doors, boxes, or hardware.
Every cabinet painting project is backed by our 🛡️ 1-Year “No Fuss” Guarantee. Any workmanship issue within one year — chipping at hardware contact points, adhesion failure, finish inconsistency — our team returns and corrects it at no cost. No runaround. That’s a commitment most painters won’t make, because it requires doing the prep right in the first place.
74 verified Google reviews from NWA homeowners. Highest-rated painting contractor in Bentonville.
🛡️ 1-Year “No Fuss” Guarantee on all workmanship. If the finish fails within 12 months, we fix it.
Factory-smooth result with no brush marks. Spray application is not optional — it’s the only way to achieve a durable, level cabinet finish.
Bonding primer matched to your substrate. MDF, laminate, and wood each require a different primer. We don’t guess.
Two-plus decades executing cabinet finishes on Bentonville and NWA kitchens. We’ve seen every substrate and condition.
Written quote at estimate. No change orders after work starts. The price you’re given is the price you pay.
Recognized as a Best of NWA painting contractor. A+ BBB accredited. HomeAdvisor Elite rated.
Kitchen protected before work begins. All hardware bagged and labeled. Counters, appliances, and floors covered throughout the project.
“”
“”
“”
A large share of Bentonville’s newer housing stock was built with builder-grade MDF cabinets — primarily in communities developed between 2005 and 2020 along the 72712 and 72713 corridors. These kitchens were designed for speed of construction, not longevity of finish. The flat-pack construction and thin MDF panels are paintable, but they require a primer system specifically formulated for non-wood substrates. When we get a call from a homeowner in Nichols Farm or Sugar Creek saying the cabinet paint is peeling after two years, the cause is almost always a previous painter who used wall paint without a bonding primer step.
Bentonville also has a significant population of older homes near downtown with solid-wood cabinets in original or previously-repainted condition. These are generally easier to prep but often have multiple layers of old paint that need proper sanding and adhesion prep before a new finish will hold. Every kitchen is assessed individually. Cabinet painting is the highest-skill residential service we offer, and we treat it accordingly. Free estimate available throughout Bentonville and adjacent cities including Cave Springs, Centerton, and Rogers.
Last Updated: March 2026
A full kitchen cabinet painting project in Bentonville typically ranges from $2,000 to $5,000+ depending on the number of doors, substrate condition, and prep requirements. Most standard kitchens (20 to 35 doors) run $3,000 to $4,000. Free written estimate available — call (479) 321-2466.
For most Bentonville homeowners, yes. Full cabinet replacement runs $15,000 to $30,000+ for a standard kitchen. Cabinet painting with a proper process achieves a like-new result at $2,000 to $5,000. The caveat is process: paint-over shortcuts will fail quickly, while a properly prepped and spray-applied finish can last 10+ years.
Two causes: wrong product (wall-spec latex applied to cabinet surfaces) and skipped prep (no degloss, no bonding primer). MDF cabinets require a bonding primer specifically formulated for non-porous substrates — standard latex primer will not adhere. Brush Brothers uses a full bonding primer system and Sherwin-Williams Emerald Urethane Trim Enamel for all cabinet work.
Yes. Every door and drawer front is removed and numbered before any painting begins. This allows full spray coverage on all faces without drips, brush marks, or hardware masking shortcuts. Cabinet boxes are painted in place; doors and drawer fronts are sprayed in a controlled environment and reinstalled after full cure.
Sherwin-Williams Emerald Urethane Trim Enamel is our standard cabinet topcoat. It’s one of the hardest-curing finishes available — resistant to chipping at hardware contact points, cleaning chemicals, and yellowing over time. Applied over a bonding primer matched to the substrate (MDF, laminate, or wood).
Most Bentonville kitchen cabinet projects take 3 to 5 days. Day 1 involves door removal, hardware removal, and prep. Days 2 and 3 are primer and finish coat application with cure time between coats. Day 4 or 5 is reinstall and final adjustment. Timeline confirmed during your free estimate.
Yes. Two-tone cabinet finishing is a common request. Upper cabinets are typically a lighter color (white or off-white) with a contrasting island or lower cabinet in a darker shade. The process is the same — doors removed and sprayed separately so each color gets a clean, fully covered result.
Yes. Fully licensed and insured in Arkansas with general liability and worker’s compensation on every project. A+ BBB accredited, HomeAdvisor Elite rated. Documentation available before work begins.
Yes. Every cabinet project is covered by the 🛡️ 1-Year “No Fuss” Guarantee. Any workmanship issue within 12 months — adhesion failure, chipping at hardware points, finish inconsistency — our team returns and corrects it at no cost. Normal wear is excluded, but process failures are covered.
Upfront pricing. Written quote. No pressure. Our team inspects your existing cabinets, identifies substrate type, and gives you a price you can plan around before any commitment.
