Decks · Railings · Stairs · Wood Features
Brush Brothers Painting protects Rogers decks from UV, moisture, and NWA weather with thorough prep and Sherwin-Williams SuperDeck penetrating stain. Every job backed by our 🛡️ 1-Year “No Fuss” Guarantee and a 5 Google Rating.
Rogers decks take a beating. Summer UV bleaches and grays wood within a season. Spring and fall rain drives moisture into unprotected wood grain, leading to swelling, cracking, and eventually rot at posts and joists. A deck stained over dirty or failed wood is not protected — it just looks protected until it starts to peel six months later.
Brush Brothers Painting treats deck prep as the job. Before any stain is applied, decks are cleaned to remove dirt, algae, and mildew. Failed old stain is stripped or mechanically abraded where it has peeled or bubbled. Wood is allowed to dry to the correct moisture content before application — stain applied to wet wood does not penetrate and will fail early.
The product we use on Rogers decks is Sherwin-Williams SuperDeck — a penetrating oil-based stain that soaks into the wood grain rather than sitting on the surface. It protects from the inside out, blocking UV and repelling moisture while allowing the wood to breathe. Available in transparent, semi-transparent, and solid tones depending on how much wood grain you want to show.
We apply deck staining spring through fall when temperatures and humidity allow proper penetration and cure. Every project includes a written estimate, full surface prep, and our 🛡️ 1-Year “No Fuss” Guarantee.
Last Updated: March 2026
We assess deck size, wood condition, existing stain type, and how much prep the surface requires. Written quote with upfront pricing provided.
Deck cleaned to remove dirt, algae, mildew, and loose debris. Old stain that has peeled or bubbled is stripped or abraded back to a sound surface.
Wood must reach the correct moisture content before stain is applied. We schedule around weather and check moisture levels before proceeding.
Sherwin-Williams SuperDeck penetrating stain applied by brush and roller for full penetration into the wood grain — not just surface coverage.
All vertical surfaces, railings, balusters, and stair stringers receive the same prep and stain treatment as the deck surface.
Full walkthrough with you before calling the job complete. Deck is ready to use within 24 to 48 hours depending on conditions.
Deck staining pricing depends on deck size, surface condition, and how much prep work is required. These ranges reflect typical Rogers projects.
Deck size and condition dependent. Includes surface prep, cleaning, and two coats of Sherwin-Williams SuperDeck. Railings and stairs included.
Factors that affect price: deck square footage, extent of failed stain requiring removal, wood condition and repair needs, railing complexity, and number of levels. Schedule a free estimate for an exact number.
Cleaning, stripping, and moisture assessment before any product is applied. Stain on a dirty deck is wasted material.
Sherwin-Williams SuperDeck soaks into the wood grain — not a surface film that peels. Protects from the inside out.
Our team brings 25+ years of exterior wood finishing experience to every Rogers deck project.
Any workmanship issue within one year — we come back and fix it at no cost.
If anything we stained peels, fails, or shows workmanship issues within one year of project completion, our team returns and corrects it at no cost. No forms, no arguments. That is our commitment to every Rogers homeowner.
Most deck staining projects in Rogers run $1,000 to $3,500+. The range depends on deck size, surface condition, and how much prep work — cleaning, stripping, and wood repair — is required. We provide a written estimate before any work begins.
Most NWA decks need restaining every two to three years for semi-transparent stains, and every three to five years for solid stains, depending on sun exposure and weather. Proper prep at each application extends the cycle.
We use Sherwin-Williams SuperDeck on Rogers decks. It is a penetrating stain that soaks into the wood grain rather than sitting on the surface, which means it does not peel the way film-forming products do. Available in transparent, semi-transparent, and solid finishes.
Yes — always. Stain applied over dirt, algae, or mildew will not bond properly. We clean and prepare the surface as part of every deck staining project.
Depends on the condition. If the existing stain is sound and adhering, a compatible product can be applied over it. If it is peeling or bubbling, it must be stripped or abraded back to a sound surface first. We assess this during the estimate.
Spring and fall are ideal — moderate temperatures, lower UV intensity, and better moisture conditions for penetration and cure. We do not stain in rain or when overnight temperatures drop below 50 degrees.
Yes. Brush Brothers NWA LLC is fully licensed and insured in Arkansas with general liability coverage on every job.
Any workmanship issue within one year of project completion and our team comes back to correct it at no cost. Applies to every deck staining job we complete in Rogers.
Upfront pricing, clean jobsites, no surprises — backed by our 🛡️ 1-Year “No Fuss” Guarantee.